| GLOBAL HOME | UP | SEARCH | | |
|
||
Hitachi Releases 65 MIPS SuperHTM Single-Chip Microcontrollers | ||
with 256-Kbyte On-Chip 3.3 V Single-Power-Supply Flash Memory |
65 MIPS processing performance, approximately double that of previous Hitachi products, plus large-capacity on-chip flash memory suitable for controller applications in digital consumer and OA products and industrial equipment enable high-performance, low-cost end-products to be achieved | ||||||||||||||||||||||||||||
Tokyo, December 17, 2001 Hitachi, Ltd. (TSE: 6501) today announced the SH7144F and SH7145F F-ZTATTM version*1 32-bit single-chip RISC microcontrollers, featuring 65 MIPS high processing performance and 256 Kbytes of on-chip 3.3 V single-power-supply flash memory, for use in digital consumer products such as digital video cameras and video printers, OA equipment such as fax machines and color copiers, and industrial devices such as AC servos and sequencers. Hitachi is also releasing mask ROM versions SH7144 and SH7145. Sample shipments of the SH7144F and SH7145F will begin in February 2002 and Volume production of SH7144 and SH7145 will begin in 4Q 2002 in Japan. These products incorporate a SuperHTM family*2 SH-2 CPU core, and are successors to the SH7040 Series which has won high acclaim in embedded applications in the consumer, information, OA, and industrial fields. With a finer 0.35m process for faster CPU and peripheral module operation, processing performance has been improved to approximately double that of previous Hitachi products. In addition, peripheral module and interface enhancements enable high system performance to be achieved together with low system cost. The use of 32-bit microcontrollers has recently become widespread in such fields as digital consumer products, OA equipment, and industrial device, enabling higher product performance to be achieved. Hitachi has previously released the SH7034 with an SH-1 CPU core and the SH7040 Series incorporating an SH-2 as products for these markets. However, systems are constantly developing away from simple control functions toward greater functionality and higher performance, including voice and image handling capability, at the same time as prices continue to fall. Previously, voice and image data processing has been handled by dedicated chips or middleware using expensive high-performance microcomputers, presenting a problem in the attainment of lower product costs. There is thus a market need for high-performance devices offering good cost-performance that can solve this problem, as well as a strong demand for devices offering comprehensive peripheral functions that will enable fewer peripheral circuit parts to be used and product costs to be reduced. To meet this market need, Hitachi has developed the SH7144F and SH7145F 32-bit F-ZTAT microcontrollers with on-chip 3.3 V single-power-supply flash memory, offering higher performance and a lower operating voltage, as successors to the highly acclaimed SH7040 Series. [Product features] Major features of these products are summarized below.
Although these products are single-chip microcontrollers, the external data bus can be extended to a maximum of 32 bits. Combined use of the on-chip DMA controller enables high-speed transfer of large volumes of data without imposing a load on the CPU, a feature useful for large-volume image data transfer for OA equipment such as printers and fax machines, for example. This 32-bit data bus extension function also allows fast execution of programs stored in external memory. Other features include a reduction in the A/D converters conversion time from 9.3s to 5.4s thanks to the faster operating frequency, and a module standby function provided as a power-down mode that enables the clock supply to be halted for unnecessary modules, allowing power consumption to be cut according to application system conditions. Current cross-software can be used for the development environment, while on the hardware side the E8000S emulator can be used, and the inclusion of on-chip debugging functions (H-UDI and AUD*5) allows the use of an E10A PC card-sized emulator, enabling simple connection to a small user system board. The packages used are a 112-pin QFP for the SH7144F and SH7144 and are a 144-pin LQFP for the SH7145F and SH7145, offering pin-compatibility with the current SH7044 and SH7045, respectively. Hitachi plans to extend the product lineup in the future with models offering higher speed and further enhanced peripheral functions.
< Typical Applications >
< Prices in Japan > (For Reference) < Specifications> |
WRITTEN BY Corporate Communications Division |