Skip to main content

Hitachi

CPU modules

Product name Type Specifications
LPU
(basic CPU)
LQP512 Basic functions for ladder, ladder memory 100-k steps, tool port/high-level link (H-7338) port, RI/O incorporated (two ports)
CMU
(expanded CPU)
LQP527 For HI-FLOW and C language tasks, user memory 20 M bytes, LAN port (100/10BASE-T) incorporated, equipped with real-time OS CPMS, connectable to battery modules
Battery LQZ500 Battery pack module for backup of CMU (LQP527) user memory (20 M bytes)

Note : The use of a CMU requires an LPU.

Mount base

Product name Type Mountable modules
PS LPU CMU ST OP I/O
LPU mount base 4-slot HSC-1540 1 1 1 4 (3)
8-slot HSC-1580 1 1 1 8 (7)
I/O mount base 2-slot HSC-1021 1 1 2
4-slot HSC-1041 1 1 4
8-slot HSC-1081 1 1 8
I/O mount base
for scan-type AI
8-slot HSC-1281 1 1 8

PS : power supply module
ST : I/O station module
OP : communication module
I/O : Input and output module
Figures in ( ) in the table indicate the numbers of mountable modules when CMU module is mounted.

Power supply modules

Product
name
Input rating Type Application
AC input 100-120 VAC LQV000 Common for CPU and I/O mount base (2-, 4- or 8-slot)
AC/DC
input
switchover
100 VAC/VDC,
110 VAC/VDC
LQV100 Common for CPU and I/O mount base (2-, 4- or 8-slot)
DC input 24 VDC LQV020 Common for CPU and I/O mount base (2-, 4- or 8-slot)

Communication modules (CPU options)

Communication type Product name Type Specifications
Ethernet ET.NET *1 LQE720 100BASE-TX, TCP/IP + UDP/IP
Optical dual CPU link OD.RING *2 LQE510 Optical dual ring type, up to 4 km distance between stations
LQE515 Optical dual ring type, up to 1 km distance between stations
OPCN-2
(FL-net)
FL.NET *3 LQE702 Ver.2.00 / Ver.3.01(class 1) Ethernet-base control network, 100BASE-TX
RS-232C RS-232C *5 LQE560 RS-232C x 2 ports, up to 19.2 kbps, non-procedure/H-7338 protocol switchover
RS-422 RS-422 *5 LQE565 RS-422 x 2 ports, up to 19.2 kbps, non-procedure/H-7338 protocol (with interrupt) switchover
OPCN-1
(JPCN-1)
J.NET *6 LQE540 No interrupt OPCN-1-compatible master station,
1 M bps (240 m) to 125 k bps (1,000 m)
J.NET-INT *6 LQE545 Interrupt
RI/O with interrupt IR.LINK *7 LQE546 Remote I/O master station with interrupt function
DeviceNet D.NET 2ch *8 LQE770 Built-in power supply  
LQE775 External power supply
Duplex CPU SYS SW LQZ700 System switchover switch; response time: 15-25 ms or less
 
*1 to *10 require parameterization software (optional) *1 to *10.

I/O station modules

Communication type Product name Type Specifications
Standard remote I/O station RI/O LQS010 S10 system remote I/O station, 768 kbps, total extension up to 300 m
OPCN-1
(JPCN-1)
J.STATION LQS020 OPCN-1-compatible slave station, equipped with RS-232C port
RI/O with interrupt IR.STATION LQS021 Remote I/O slave station with interrupt function
DeviceNet D.STATION LQS070 DeviceNet slave station

Recommended software

Type Product name Type Use
C compiler SuparH RISCanging C/C ++ (Ver.7) S-7350-21P C language compiler for SH (used in combination with RPDP/S10) (Type:S-7895-10) or C SET (Type:S-7895-52)
SuparH RISCanging C/C ++ (Ver.9.0.4) S-7350-22P (For Windows® 7 (32bit / 64bit) / 10 ( 32bit / 64bit) C language compiler for SH (used in combination with RPDP/S10 (Type:S-7895-63) or C language set (Type:S-7895-72) or ALL SET (Type:S-7895-74 ))

Input and output module

Type Rated
input/output
specifications
Type Specifications
Number of points External connection Insulation
unit
Digital input 100-120 VAC LQX110 16 points (with latch) Terminal block 8 points
LQX130 16 points Terminal block 8 points
12-24 VDC LQX200 16 points Terminal block 8 points
LQX201 16 points
(for high speed)
Terminal block 8 points
LQX210 16 points
(with latch)
Terminal block 8 points
LQX211 16 points
(with latch)
Terminal block 8 points
100 VDC LQX240 16 points Terminal block 8 points
LQX250 16 points
(with latch)
Terminal block 8 points
12-24 VDC LQX300 32 points 40P connector 32 points
LQX310 32 points 34P connector 32 points
LQX350 64 points 40P connector 32 points
Digital output Relay contacts
100-220 VAC/,
12-24 VDC/
48 VDC,
100-110 VDC
LQY100 16 points Terminal block 8 points
LQY140 8 points Terminal block Each point independent
LQY160 6 points Terminal block Contact a x 2
Contact c x 4
Transistor
(sink output)
12-24 VDC
LQY200 16 points Terminal block 16 points
LQY300 32 points 40P connector 32 points
LQY310 32 points 34P connector 32 points
LQY350 64 points 40P connector 32 points
Digital inputs and outputs mixed together Input : 12-24 VDC
Output : Transistor
12-24 VDC sink output
LQZ300 Input 32 points
Output 32 points
Connector 32 points
Analog input ±5 V/±10 V/
+1 to +5 V
LQA000 4 points Terminal block 4 points
LQA050 8 points Terminal block 8 points
LQA055
4 to 20mA LQA100 4 points Terminal block 4 points
LQA150 8 points Terminal block 8 points
LQA155
Resistance
temperature
Pt 100Ω
±100°C/
-200 to +350°C/
-200 to +500°C
LQA200 4 points Terminal block 4 points
Resistance
temperature
Pt 100Ω
-50 to +150°C/
-200 to +100°C/
-100 to +300°C
LQA201 4 points Terminal block 4 points
Scan-type analog input ±5 V LQA800 A/D conversion module  
LQA810 4 points Terminal block 4 points
Analog output ±5 V/±10 V
+1 to 5 V
LQA500 4 points Terminal block 4 points
4 to 20mA LQA600 4 points Terminal block 4 points
pulse counter
(Up&Down / Up)
Inputs : 12-24 VDC, 2-phase/single phase, STOP, Comparative output : 12-24 VDC LQC000 1 points Terminal block 1 points

Programming software (compliant with DOS/V models, Windows ® 2000
/Windows ® XP /Windows ® 7 / Windows ® 10 version)

Type Product name Type Use
Programming and parameter setting software Base set S-7895-50 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
Ladder diagram, Base system,
Backup Restore system,
a complete set of parameter setting software
HI-FLOW set S-7895-51 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
Ladder diagram, HI-FLOW,
Base system,Backup restore system,
a complete set of parameter setting software
C language set * S-7895-52 (For Windows®2000 / XP)
Ladder diagram, RPDP/S10, Debugger, Base system,
Backup restore system,
a complete set of parameter setting software
To use C language, a separate C compiler (Type: S-7350-21P) is required.
S-7895-72 (For Windows®7(32bit) / 10(32bit))
Ladder diagram, RPDP/S10, Debugger, Base system,
Backup restore system,
a complete set of parameterization software,
To use C language, a separate C compiler (Type: S-7350-22P) is required.
ALL SET * S-7895-74 (For Windows®10(64bit))
Ladder diagram, HI-FLOW,RPDP/S10, Debugger, Base system, NX,
Backup restore system,
a complete set of parameterization software, To use C language, a separate C compiler (Type: S-7350-22P) is required.
Programming software S10Tools system S-7895-01 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
Ladder diagram system, HI-FLOW system
Ladder chart system S-7895-02 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
Ladder diagram programming
HI-FLOW system S-7895-03 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
HI-FLOW programming
RPDP/S10 system * S-7895-10 (For Windows®2000 / XP)
Development of C language programming
To use C language, a separate C compiler (Type: S-7350-21P) is required.
S-7895-63 (For Windows®7(32bit) / 10(32bit))
Development of C language programming
To use C language, a separate C compiler (Type: S-7350-22P) is required.
CPMS Debugger system S-7895-07 (For Windows®2000 / XP)
C language program debugging
To use C language, a separate C compiler (Type: S-7350-21P) is required.
S-7895-62 (For Windows®7(32bit) / 10(32bit))
C language program debugging
To use C language, a separate C compiler (Type: S-7350-22P) is required.
Maintenance tools Base system S-7895-38 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
Remote maintenance
Backup restore system S-7895-09 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
High-speed backup (save and load)
Parameter setting software ET.NET system *1 S-7895-29 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For ET.NET (LQE520, LQE720)
OD.RING/
SD.LINK system *2
S-7895-28 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For OD.RING (LQE510, 515), SD.LINK (LQE530)
FL.NET system *3 S-7895-30 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For FL.NET (LQE500, 502, 702)
CPU LINK system *4 S-7895-22 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For CPU LINK (LQE550)
RS-232C/
RS-422 system *5
S-7895-24 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For RS-232C (LQE560), RS-422 (LQE565)
J.NET system *6 S-7895-27 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For J.NET (LQE540, 545)
IR.LINK system *7 S-7895-36 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For IR.LINK (LQE546)
D.NET system *8 S-7895-31 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For D.NET (LQE570, 575, 770, 775)
FR.LINK system *9 S-7895-21 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For FR.LINK (High-speed remote I/O (LQE740))
EQ.LINK system *10 S-7895-41 (For Windows®2000 / XP / 7(32bit) / 10(32bit))
For EQ.LINK (LQE701)

Note : The code affixed to the end of the model denotes the following : "J" means "comes with a Japanese manual" and "E" means "comes with an English manual."
* C compiler is separately reguired to use the C language. Please purchase the recommended software (commercial product).

Information service

Trademark Information

Microsoft® and Windows® are either trademarks or of Microsoft Corporation of the USA in the USA and other countries.
Company names and product names in other texts are trademarks or registered trademarks of the respective companies.

Cautions

This website describes the characteristic functions of the products. It does not specify operating constraints or anything of the sort. Before actual use, please read the operating instructions and manual for the product concerned, and be sure to check the constraints and other details.

The Company assumes no responsibility for any damage arising out of anything not attributable to its own responsibility, any loss of opportunity or profit on your part resulting from any failure of its products, any damage or secondary damage arising from any special situation regardless of whether the Company can predict it or not, any warranty or damage to anything other than the Company's product, or warranty on any other task.

Safety instructions

To ensure safety, please read the operating instructions and manual, and be sure to use the product correctly.

The operating environment must be in the range specified in the catalogs, operating instructions and manuals. Please do not use the product in an environment that is hot, humid, dusty, or exposed to corrosive gas, vibration, impact or other external hazard. Otherwise, you run the risk of fire, breakdown, electric shock or malfunction.

To ensure safety, please conform to the operating instructions and manual when installing and wiring the product as well. Connections must be made only by personnel with expertise in electrical work, electrical wiring or similar work. Also prevent entry of external objects.

The products specified on this website comprise those with limitations on applicable usages, locations and other details, and those that require periodic inspection. For details, please consult your dealership or the Company.

This product is manufactured under strict quality control. However, please install safety devices to prevent serious accidents when using this product on important equipment that might affect human lives in case of product failure or on equipment that is predicted to cause a serious loss if mishandled.